FMC/FME Micro-Channel Condenser Reliable Aluminium Alloy Aluminum
Extruded Pipe 0395
Product description:
FMC/FME is a new type of micro-channel heat exchanger which is
developed for the problems of condensation and frost melting water
difficult to be discharged from the conventional single-cooling
parallel flow (PFC), and the uneven distribution of the refrigerant
gas-liquid two-phase, which is unable to meet the problem of heat
pump air conditioner having both condensation and evaporation
functions.
Multiple refrigerant distribution programme
The porous flat tube is divided into several zones by the header
tubes at both ends and the partition plate in the middle, the
refrigerant flows back and forth in each zone to form a
condensation/evaporation circuit, and each zone arranges different
numbers of porous flat tubes in parallel in the direction of
gravity according to the state of the refrigerant in the two-phase
and the demand of heat exchange.
The refrigerant distribution programme is designed according to
various system characteristics and requirements.
Features:
Reliability
Products for the whole aluminium alloy, compared with copper tube
aluminium fin heat exchanger material between the potential
difference is small, potential corrosion is small, but aluminium
resistance to environmental corrosion than copper is poor, in order
to improve the resistance to environmental corrosion, so as to
comply with the use of air-conditioning products cycle, through the
different aluminium alloys (porous micro-channel tubes, aluminium
fins, the header tube) between the welding bonding part of the
potential design, the priority of corrosion of
non-pressure-resistant parts;
Passivation + hydrophilic coating
improving the overall corrosion resistance of aluminium alloy
materials
Refrigerant application and saving
Can be applied to a variety of refrigerants, high-pressure
refrigerant tube small micro-channel greatly reduces the volume of
the tube, can save refrigerant.
Techical Parameters:
Manufacturing materials-Header
| Fin size | Pitch | Notch |
Φ25×1.5T
| 10.5/7.7
| 20×2.1/20×2
|
Φ32×1.8T
| 10.5
| 25.4×2
|
Φ38×2.2T
| 10.5
| 32×2
|
New Header1
| 10.5/7.7
| 20X2.1/20X2/25.4X2
|
New Header2
| 10.5/7.7
| 20x2.1/20x2/25.4x2
|
Manufacturing materials-Porous micro-channel tubes
| Height/mm | Width/mm | Number of holes |
| 2.1 | 20 | 16 |
| 2.0 | 25.4 | 26/20/13 |
| 2.0 | 32 | 32/13 |
| 2.0 | 20 | 16/15/12 |
Applications:
Household heat pump and air-conditioning condenser;
Commercial multi-line evaporator, condenser;
Commercial heat pump system (module machine) evaporator;
Bus and car air-conditioning evaporator, condenser;
Commercial air-conditioning duct machine evaporator;
Electric locomotive, rv, truck, engineering vehicle condensers,
evaporator;
New energy vehicle air conditioning condenser, evaporator...
Etc.
